Processing math: 100%

Article

Thermophysical Properties of Materials
2016. V. 54. № 1. P. 61–66
Zhukov A.N., Zakiev S.E., Yakushev V.V.
Assessment of the effect of particle size on the rate of temperature alignment in systems used for shock-wave synthesis of diamond, cubic boron nitrade, and γ-phase of silicon nitride, based on a simple model
Annotation
The change in the spatial distribution of relative temperatures in the system of a spherical particle located in the center of a spherical matrix is simulated. Silicon nitride (Si3N4) and boron nitride (BN) are considered in a matrix of potassium bromide (KBr); graphite, diamond, and silicon nitride are studied in a copper matrix. Calculations are performed for the four sizes of particles: 1, 5, 20, and 100μm. It is shown that the temperature is equalized by approximately 80% in 1μs in the particles of Si3N4 and BN with a size of 5μm in the KBr matrix. In the system of silicon nitride–copper, such equalization is performed for a particle with a diameter of 20μm. For a diamond particle in the copper matrix, the particle size may be even greater. The particle sizes for which calculations showed a rather high rate of heat transfer in a time of 1μs either match or are somewhat larger than the particles of diamond, cubic boron nitride, and γ-silicon nitride formed during the real shock-wave synthesis of these materials.
Article reference:
Zhukov A.N., Zakiev S.E., Yakushev V.V. Assessment of the effect of particle size on the rate of temperature alignment in systems used for shock-wave synthesis of diamond, cubic boron nitrade, and γ-phase of silicon nitride, based on a simple model, High Temp., 2016. V. 54. № 1. P. 61